Brand : MOTOVARIO
Specifically designed for applications involving conveyors or augers, these units are also suitable for a wide variety of industrial fields.
The S series shaft-mounted gearmotor, available in cast iron from size 050 to 125, offers a wide range of reduction ratios, ensuring maximum efficiency in all operating conditions.
The new S Series includes two new sizes, 140 and 150, to extend the shaft mounting to heavier applications.
- มอเตอร์เกียร์ เกียร์ทดรอบ รุ่น SHAFT MOUNTED GEAR (S Series) แบรนด์ MOTOVARIO
- Casing ทำจาก เหล็กหล่อ (Cast Iron)
- หล่อลื่นด้วยน้ำมันเกียร์ โอริงซีล และลูกปืนคุณภาพสูง
- ใช้ในอุตสาหกรรมที่ต้องการความทนทานสูง นอกจากนี้ยังมีเกียร์ทดรอบรุ่นอื่นให้เลือกใช้หลากหลายตามลักษณะงาน
- เกียร์ทดรอบ รุ่น SHAFT MOUNTED GEAR (S Series)
- ผลิตในประเทศอิตาลี (Italy)
- ตัวแทนจำหน่ายแต่เพียงผู้เดียวในประเทศไทย (SOLE AGENT)
Specifications:
Sizes : 050-060-080-100-125
Power from 0,12 kW up to 45 kW
Reduction ratios between 4.06 and 394.69
Torque max 9,500 N.m.
Admissible radial loads max 30,000 N.
Universal casing
S..C Foot-flange mounting / Hollow shaft
S..D Foot-flange mounting / Solid shaft
S..L Foot-flange mounting / Shrink disc shaft
Gearing with 2 and 3 reduction stages
Modularity
Gears hardened and tempered with shaved or ground profile
Cases in EN-GJL-200 grey cast iron for high strength and optimized with FEM analysis
Excellent mechanical strength
Load capacity calculated to ISO 6336, DIN 3990 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder according to DIN 1843
Sizes : 140-150
Power from 0,12 kW up to 45 kW
Reduction ratios between 4.06 and 394.69
Torque max 9,500 N.m.
Admissible radial loads max 30,000 N.
Universal casing
S..C Foot-flange mounting / Hollow shaft
S..L Foot-flange mounting / Shrink disc shaft
Gearing with 2 and 3 reduction stages
Gears hardened and tempered with ground profile
Cases in EN-GJL-200 grey cast iron
Load capacity calculated to ISO 6336, DIN 3990 and AGMA 2001
Gearboxes supplied without lubricant
Painted with RAL 5010 blue epoxy-polyester powder according to DIN 1843