SOLID CARBIDE ROUGHING END MILL HPC TIALN 10 MM GARANT

SOLID CARBIDE ROUGHING END MILL HPC TIALN 10 MM GARANT

Version: 
• For roughing and finishing. 
• Up to 1×D into solid material at very high feed rates with smooth cutting action.

Advantage: 
• Optimised flute form, eccentric relief ground, large flutes.

Application: 
Suitable for:
• 250 m/min cutting speed (vc) in general structural steels up to 500 N/mm2.
• 200 m/min cutting speed (vc) in unalloyed quenched and tempered steels up to 750 N/mm2, unalloyed case-hardening steels up to 750 N/mm2, nitriding steels up to 750 N/mm2.
• 180 m/min cutting speed (vc) in unalloyed quenched and tempered steels up to 900 N/mm2, unalloyed case-hardened steels up to 900 N/mm2, nitriding steels up to 900 N/mm2, tool steels up to 900 N/mm2.
• 180 m/min cutting speed (vc) in alloyed quenched and tempered steels up to 1100 N/mm2, alloyed case-hardened steels up to 1100 N/mm2, alloyed tool steels up to 1100 N/mm2.
• 70 m/min cutting speed (vc) in sulphuretted stainless steels up to 700 N/mm2, austenitic stainless steels up to 850 N/mm2.
• 50 m/min cutting speed (vc) in stainless and acid-free steels martensitic / ferritic up to 1100 N/mm2.
• 120 m/min cutting speed (vc) in cast iron, spheroidal graphite cast iron, tempered cast iron.
• Free cutting steels, free cutting stainless steels, aluminium and non-ferrous metals.
• Applicable with emulsion with at least 4 % grease content (for tapping at least 8 %).
• Applicable for dry machining
• For use with compressed air feed