Digital Control Units

Digital Control Units

PD3-3024-3-EI Digital Control Units [for 24 V Light Units] These Digital Power Supply Units enable controlling the light intensity in 256 steps. They supply power to 24V LED Light Units.   PD3 Series [for 24V Light Units] Constant lighting, ON/OFF l...
Call Seller for Quote
Model: PD3-3024-3-EI
Company Information
Name : W.J. TECHNOLOGY CO., LTD.
Contact : ดับบลิวเจ เทคโนโลยี
Tel : Please login.

PD3-3024-3-EI

Digital Control Units [for 24 V Light Units]

These Digital Power Supply Units enable controlling the light intensity in 256 steps. They supply power to 24V LED Light Units.
 
PD3 Series [for 24V Light Units]

Constant lighting, ON/OFF lighting, and strobe lighting modes are supported. Parallel, EIA-485, and Ethernet communications protocols are all supported for external control.

 

Direct number 2000776
Lighting method Constant/Strobe lighting
Drive method Constant-voltage system
Intensity control method PWM control, Lighting time control
No. of channels 3 channels
Applicable Light Units 24 V/28 W
PWM Frequency 125 kHz
Light control 
(manual)
Use of the setting switch on the front panel (256 steps)
Light control 
(remote)
Command input via TCP/IP, UDP/IP communications
Error detection display OCP' is displayed on the Digital display
Error detection output Send the Error command when overcurrent is detected.
Over current protection Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply.
Input voltage 
(rating)
*This product operates at a power supply voltage of 100 to 240 VAC. The supplied powercord, however, is for use with 100 V. If this product is to be used at 200 V or above, use a 200 V power cord.
Power consumption 
(typ.)
78 VA
Frequency 50/60 Hz
Inrush current 
(typ.)
15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start
Output voltage 
(rating)
24 VDC
Output current 
(rating)
Total for 3 channels: 1.1A
Conformed standards CE, RoHS
Output connector SMP-03V-BC x 3 pieces
External control connector Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: RJ-45
Cooling method Natural air cooling
Material Alminium, ABS
Operating temperature and humidity Temperature: 0 to 40ºC, Humidity: 20 to 85%RH
(No condensation)
Storage temperature and humidity Temperature: -20 to 60ºC, Humidity: 20 to 85%RH
(No condensation)
Dimensions W 84 mm x D 82.6 mm x H 120 mm
Weight 600 g
Accessories 2m long 3-prong AC power cord with ground terminal x 1, Instruction Guide x 1
บริการค้นหาสินค้า